Product Catalog

Braces, Angle

Features:

• These braces are used as tension members on the side of the arm opposite the odd conductor to compensate for the unbalanced load.
• Pole mounting end is flattened so the brace can be used as either a right-hand or left-hand member.

Material:

• Hot Dip Galvanized

Crossarm, Flat Steel

Features:

• Flat crossarm braces, used in pairs, are an inexpensive means of aligning and supporting crossarms.
• Mounting hole diameters are 7/16-inch for 3/8-inch crossarm mounting bolts and 9/16-inch for pole mounting with 1/2-inch lag screw or through bolt.

• Hole centers are 1-inch from the brace ends, which are rounded for extra safety.

Double Span, Steel

Features:

• One piece, angle steel, double span braces are used to support heavy crossarm construction.
• Braces are attached to the underside of the crossarm with 1/2-inch bolts or lag screws and fastened to the pole with a 5/8-inch bolt.
• The pole mounting section is designed to allow more than ample clearance for wrenching.

Material:

• Hot Dip Galvanized