Crossover Clamps

Features:

• Crossover Clamps For CATV or Telephone Cables
• Used to clamp two messengers where they cross at right angles.
• The J7930 Clamp sections are 1-1/2-inch wide and 3-1/4-inch long.
• Two 1/2-inch diameter bolts have oval shoulders to prevent turning when tightening.

Material:

• Hot Dip Galvanized

Cable Suspension Clamps

Features:

• Used with through bolts, which serve as a clamping member, and are shaped to securely grip messenger wire to the pole.

• A nut and square washer is used between the clamp and the pole to provide proper spacing.

• The J1095 is used for light cables and consists of the clamping members only. A 5/8” through bolt tightens the clamp on the wire as well as to the pole.

• The J1096 and J25088.1 three-bolt clamps are used for heavier cables and are furnished with a 5/8” through bolt hole.

• The J25088.1 keeper plate is flat.

ONE - BOLT

THREE - BOLT