Lemco Installation |
| |
|
Security Shield Tools
Designed to work with shielded
f-fittings and terminators, these tools will not crack
like those supplied by others. High carbon steel is
hardened providing the strength for the tool to free
fittings from threads seized by oxidation. Each tool
features a pivotal reach-through handle allowing the
installer to gain adequate leverage. In cold weather,
Security Shield Tools can assist when inserting the cable
into the connector.
|
 |
|
|
Headend Extension Tools F and BNC types
Connector installation and removal tools to access
high-density areas such as the back of headend equipment.
The 7 1⁄2” extension is coupled with either our long or
short handle and is available for either 7⁄16” F or BNC
connectors.
A-716
for 7⁄16” F connectors. Overall length 12 1⁄2”.
Wt. 5 ozs.
A-716S
for 7⁄16” F connectors. Overall length 9 1⁄2”.
Wt. 4 ozs.
A-BNC
for popular BNC connectors. Overall length 12 1⁄2 “. Wt.
5 ozs.
A-BNCS
for popular BNC connectors. Overall length 9 1⁄2 “. Wt.
4 ozs. |
 |
|
|
Combination Trap and 7⁄16 Tools
Lemco Trap Wrenches, like Lemco security shield tools,
feature solid steel construction.
WT-10
for working with traps and 7⁄16 inch hex f-fittings.
7 1⁄2 inches.
Wt. 8 ozs.
WT-20
for working with traps and f-fittings within security
sleeves. 7 1⁄2 inches.
Wt. 7 ozs |
 |
|
|
Terminator Tools
Simple to use post-type terminator tools turn onto
terminators until the post of the tool bottoms out and
engages the terminator. The tools have no moving parts and
are available for most popular terminators.
4” tool Wt. 4 ozs.
7” tool Wt. 5 ozs.
|
 |
|
|
 |
|
|
Terminator ToolTTV-3
7 1⁄4 inches Wt. 4 ozs.
Tool for Viewsonics locking terminators. Works with both 2
and 3 slot terminators.
|
 |
|
|
TTG-10
4 inches Wt. 2 ozs.
TTG-20
7 1⁄4 inches Wt. 4 ozs.
Tool for Gilbert GTP and PPC LFT and PST Series
locking terminators. Operates without a retractor. US
Patent #6,704,987 |
 |
|
|
TTM-10
4 inches Wt. 2 ozs.
TTM-20
7 1⁄4 inches Wt. 4 ozs.
Tool for pedestals and enclosures that use the
Morlock. Also secures and removes the Cablecon Locking
Terminator. Operates without a retractor. U.S. Patent
No. 6,378,405.
|
 |
|
|
B-1283
This trap saver tool removes broken f-ports
from traps. The expanding mandrel grabs f-ports
and backs them out of the trap. A few traps saved
pays for the tool. Hardened steel construction.
43 ⁄4 inches Wt. 10 ozs. |
 |
| |
|
|
Page 1 |
Page 3 |